Paste the survey, get the section
Load point or CSV data from the Total Station. Sections are drawn at once, by chainage.
Products / Survey points to drawings
Tunnel Cross-Section Plot
From Total Station points to a finished cross-section. No CAD plotting.
Available nowRequest a demo
2D sectionOne plotted cross-section with the design line and surveyed profile both visible.
tunnel/01-section-2d.*
Draws tunnel cross-sections in 2D and 3D straight from survey points, compares them with the design section, and exports CAD-ready drawings and quantities.
2D + 3Dsection views
DXF · PDF · Excelexports
0points plotted by hand
Geometry setupThe geometry panel showing shape, radius, lining and payline fields.
tunnel/02-geometry.*
3D viewThe 3D plot rotated so several sections are visible in depth.
tunnel/03-view-3d.*
ExportThe export options, or the DXF opened in AutoCAD.
tunnel/04-export.*
2D sectionOne plotted cross-section with the design line and surveyed profile both visible.
tunnel/01-section-2d.*
Geometry setupThe geometry panel showing shape, radius, lining and payline fields.
tunnel/02-geometry.*
What it does
Design geometry you control
Set shape, width, arch radius, wall height, lining thickness for overt and invert, payline offset and shotcrete thickness.
See it in 3D
Rotate the excavated profile against the design line to spot where the tunnel runs tight or wide.
Quantities without a take-off sheet
Areas and quantities come from the plotted sections, ready for the measurement record.
Output that opens in AutoCAD
Export DXF for the drafting team, PDF for the record and Excel for the bill.
How it works
Three steps, start to finish.
Define the section
Enter the design geometry once per tunnel type.
Load survey points
Paste or import the Total Station data.
Export
DXF, PDF and Excel in one click each.
Screens
A closer look.
2D sectionOne plotted cross-section with the design line and surveyed profile both visible.
tunnel/01-section-2d.*
Geometry setupThe geometry panel showing shape, radius, lining and payline fields.
tunnel/02-geometry.*
3D viewThe 3D plot rotated so several sections are visible in depth.
tunnel/03-view-3d.*
ExportThe export options, or the DXF opened in AutoCAD.
tunnel/04-export.*
See it with your own project data.
A short call and a live demo. No slides.